Canor PH 2.10, Руководство пользователя

Страница: 5 / 6

Basics
Plug the power cord in PH 2.10. Turn on the PH 2.10 with the Power Main switch, which is located on the back
panel. When you turn on the main switch, the PH 2.10 will set into stand-by mode - the red LED diode on the
front panel lights up. After pressing the Power button controlled turning-on sequence gets initiated, which
consists of cooling and preheating the tubes, thereby extending their life span. The cooling cycle is also being
carried out when the unit is turned off, if the main switch on the back panel is not turned off, i.e. after turning off
via button on the front panel, and 45-second countdown to cooling without indication begins. If you turn on the
unit at this time, the cooling will continue and will be indicated by flashing red LED. When the cooling cycle is
over then the main toroidal transformer gets connected (the CANOR logo lights up), and then the slow start-up
of voltage begins. This cycle lasts 20 – 30 seconds.
Specificatons :
MM: 50,150,270,370,520,620,740 and 840 pF / Gain: 46dB
MC: 10,20,40,80,150,300,600 and 1200 Ohm / Gain: 70dB
Output Impedance: 500 Ohm
Inputs: RCA – MM / RCA - MC
Outputs: RCA
Total Harmonic Distortion: MM / MC <0,2% / 1V RMS
Subsonic Filter: 18dB / Octave
RIAA Accuracy: 0,3dB / 20Hz – 20kHz
Signal-To-Noise ratio MM: 84dBV
Signal-To-Noise ratio MC: 80dBV
Tube Complement: 2x 12AX7 , 2x 12AT7
Power: 230V / 50Hz / 50VA
Dimensions (WxHxD): 435 x 120 x 405 mm
Weight: 14 kg
Guarantee conditions:
Your CANOR PH 2.10 Phono Tube Preamplifier is guaranteed against any defect in materials and workmanship
for a period of 24 months from the date of purchase except for audio vaccum tubes that are covered by warranty
for a period of three months.
The warranty only applies if an original proof of purchase and acknowledged certificate of warranty can be
furnished. The warranty covers defects in materials and labor, but does not cover misuse, unauthorized
modifications, and external causes such as acts of nature.