Canor CD2 VR Скачать руководство пользователя страница 5

Important information on the display:  
 
CD READ - lights up when checking the contents of the disc 

NO DISC - lights up when there is no disc in the tray–after turning-on the CDP and after 
inserting a new CD disc  
 
 
OPEN - when a CD disc is being inserted into the tray 
 

 

Basic functions of reproduction

 

 

Connect the power cord to the CDP. Turn the CDP on with the main Power Main switch, 
which is located at the rear panel. When you turn on the switch, the CDP is put into standby 
status - on the front panel the red LED diode starts flashing. After pressing the Power button 
(on the front panel or on the remote control) controlled switching-on sequence gets initiated. 
The first forty seconds the red LED diode blinks rapidly two times per second. Then the main 
toroidal transformer gets connected (the CANOR logo lights up, and the volume control 
backlights), and then begins the slow start-up of voltage provided by slow heating of vacuum 
diode. The display shows CANOR and after a few seconds, CD READ. If there is a CD disc 
in the CD drive, display shows the number of tracks and their total length. If there is no CD 
disc in the CD drive the display shows NO DISC. 

For a period of the first 20 seconds after turning on you cannot change the display brightness 
by DIMMER button. 

Within the second forty seconds the red LED diode blinks slowly once per second. During 
flickering of the red LED diode the CDP can be switched off by the Main Power switch at the 
rear of the panel, or by the Power button at the front panel or by remote control.  

After eighty seconds, red LED stops flashing - output relay connects  the signal to output 
teflon and gold-plated RCA connectors and CDP is ready for use. 
 
 

 A. Tray opening and compact discs inserting 
 
Press OPEN button, the tray ejects. The display lights up OPEN indication.  
- make sure the tray is opened completely.  
- grab hold of a compact disc for outer edges and insert it into the tray with label on the top. 
Do not touch the record side (surface is reflected).  
- twelve-centimeter discs insert into outer ring, eight-centimetre discs into innner ring.  
 
Press OPEN, the tray plugs-in. 

Содержание CD2 VR










Отзывы: