Canor CD 1.10, Руководство пользователя

Страница: 6 / 11

DIGITAL OUTPUTS:
Allow you to connect external converters when playing CD discs. External converters transmit digital SPDIF
signal at default resolution of a CD disc simultaneously on COAXIAL output for RCA connector, and
OPTICAL output for TOSLINK connector located on the CD1.10 back panel.
DIGITAL INPUTS:
COAXIAL and OPTICAL :
By selecting these inputs we can conduct digital SPDIF signal from other devices to the inputs on the CD1.10
back panel which we connect either by coaxial or optical cable.
These inputs can process 24-bit PCM signal with a 192kHz sampling rate.
USB :
By selecting this input it is possible to connect CD1.10 to PC as a USB Audio Class 2.0 soundcard.
In case USB 2.0 interface is at disposal (otherwise USB Audio Class 1.0). To do this, it is needed to install a
driver to the PC which is on the CD disc in the delivery content. The installation process is executed via double-
click on
setup.exe file in “ Canor CD1X USB Audio Driver
“ folder, then proceed according to installation
instructions. Supported operating systems are Windows XP, Vista, Win7, Win8, Win10.
ASIO driver will be installed together with the above driver which can be used as
Output Device in various audio
players which support it (for instance foobar, JRiver, WinAmp).
After CD1.10 is connected to USB port of the PC you can launch Canor CD1X USB Audio Control Panel which
was installed together with the driver and then check info on connected device.