Canopy
6-Drawer Dresser
Page 7 of 18
NEED HELP?
For help with assembly or if you are missing a part, please call the
Sauder Woodworking Co.
1-800-523-3987
(7 a.m. to 5 p.m. PST).
Step 5: Add the Top Panel and Insert Drawers
(Hooray! You’re almost done!)
Insert a wood dowel
1.
1
into each of the six holes in panels.
Place top panel
2.
F
onto dowels and secure using six retainer pins
3
. If necessary, gently tap pins
with a mallet or hammer until top panel is secure.
Insert drawer by pulling track on left and right sliders all the way forward (including ball bearing rack).
3.
Align tracks on drawer with sliders and push in the drawer.
Slowly open and close drawer several times to ensure a good connection. If drawer isn’t sitting evenly,
find the black locks on the sides of the drawer. Pull up on the left lock and push down on the right
and pull out the drawer. Repeat step 1.
2EPEATSTEPSANDFORREMAININGDRAWERS/NCEALLTHEDRAWERSAREPROPERLYINSERTEDANDYOUVE
5.
moved the dresser into place, you may need to level it. With help, tilt the dresser and rotate the floor
levelers as needed.
F
1
1
3
PART
Wood Dowels x 6
PART
Retainer Pins x 6
1
3
To remove drawer:
pull up on left lock;
push down on right.
