Recor
ding
E
51
The XL1S can record sound in 3 audio modes:
• 16-bit (48kHz, 2 channel) for the highest sound quality
• 12-bit ST-1 (32kHz, 2 from 4 channels) for recording on two channels (stereo 1), leaving two channels
(stereo 2) free for you to add new sound at a later date.
• 12-bit ST-1, 2 (32kHz, 4 channels) for simultaneous recording on four channels (stereo 1 and stereo 2).
AUDIO MODE•• 16bit
VCR SET UP
Selecting the Audio Mode
REC LEVEL
A
M
INPUT SELECT
MIC
ATT.
AUDIO 1
MIN
MAX
L
R
BALANCE
LEVEL
AUDIO 1/MIC
REC LEVEL
A
M
MIN
MAX
MIN
MAX
L
R
AUDIO 2
AUDIO
MONITOR
0
2
6
20
40
30
50
R
L
-dB
12
1. To switch between the 3 modes, open the camera menu and select VCR SET UP.
2. Select AUDIO MODE, then select a mode.
3. Close the menu.
• The name of your chosen mode is displayed in the viewfinder and main LCD panel.
After selecting the audio mode you can set the audio input:
• The settings for 16-bit and 12-bit stereo 1 audio are the same, and are explained under “Two Channel
Recording” on the next page.
• The settings for 12-bit stereo 1, 2 are explained under “Four channel Recording” on page 53.
Note:
• For audio output details, including how to play back a tape that has new sound on stereo 2, see page 96.
(see p. 26)
