Canon XF705, Инструкция по эксплуатации

Страница: 176 / 231

FTP File Tran s fer
176
FTP File Tran s fer
You can transfer clips from the camcorder to another device connected to the network, using the FTP protocol.
The following explanations assume that the FTP server is on, ready and correctly configured.
FTP S erver and Tran s fer S etting s
Before you can transfer clips to a connected device, you need to configure the FTP server settings and other
settings related to the handling of folders and files. If necessary, consult the network administrator in charge of
the FTP server.
1 S elect [FTP Tran s fer S etting s ].
>
[
!
Network Settings]
>
[FTP Transfer Settings]
2 To enter the de s tination FTP s erver, s elect [FTP S erver] and then pre ss S ET.
• Enter the FTP server’s IP address or host name using the keyboard screen (
A
27).
3 Enter the [FTP: U s er Name], [FTP: Pa ss word], and [De s tination Folder] in the s ame way.
4 To change the port number, s elect [Port No.] and then pre ss S ET.
• To enter the port number, push the joystick left/right to select the digit to change and then up/down to select
a value for the selected digit. After completing the five digits of the port number, select [Set] and then press
SET.
5 To activate the pa ss ive mode, s elect [Pa ss ive Mode].
• Select the desired option and then press SET.
• [Off] is the standard setting for most cases. [On] (passive mode) is more appropriate for FTP transfers from
behind a firewall.
6 To s elect whether to create a new folder for every tran s fer date, s elect [New Folder by Date].
• Select the desired option and then press SET.
7 To s elect how to handle file tran s fer s when a file with the s ame name already exi s t s , s elect s [ S ame
Named File s ].
• Select the desired option and then press SET.
Option s for [New Folder by Date]
[On]: A new subfolder under the transfer destination folder “YYYYMMDD\HHMMSS” will be created
for every transfer operation.
[Off]: All the files will be transferred to the folder set as [Destination Folder] in the FTP server settings.
Option s for [ S ame Named File s ]
[Skip]: If a file with the same name already exists in the destination folder, the file will not be transferred.
[Overwrite]: Even if a file with the same name already exists in the destination folder, the file will be
transferred, overwriting any file with the same name in the destination folder.
NOTES
• You can check the current FTP settings on the [Network 4/6] to [Network 6/6] status screens.
Operating modes: