Canon XF705, Инструкция по эксплуатации

Страница: 121 / 231

121
Cu s tom Picture S etting s
Cu s tom Picture S etting s
The camcorder lets you change many settings (
A
124) that control various aspects of the image produced. As
a set, all these settings are treated as a single custom picture file. After adjusting the desired settings to your
preference, you can save up to 20 custom picture files (in the camcorder or on an SD card), and load them later
to apply exactly the same settings (
A
123). Only SD card B can be used to save and load custom picture files.
NOTES
• Custom picture files are exclusively compatible for use only with XF705 camcorders.
S electing Cu s tom Picture File s
Select a custom picture file to apply its settings to your recordings or to edit, rename, protect, or transfer it.
1 S elect [ S elect].
>
[
/
!
Custom Picture]
>
[File]
>
[Select]
2 S elect the de s ired file and then pre ss S ET.
• Select one of the custom picture files saved in the camcorder (C1 to C20). To use the settings of a custom
picture file saved on a card, copy the file to the camcorder in advance (
A
123).
• When you close the menu, the selected custom picture file’s settings will be applied.
• The icon of the [Gamma] setting in effect will appear on the left of the screen. If the detailed settings were
activated (
>
[
/ !
Custom Picture]
>
[Activate Other Settings] is set to [On]), will appear on
the left of the screen.
NOTES
• About changing custom picture related settings using the optional RC-V100 Remote Controller
- When an optional RC-V100 Remote Controller is connected to the camcorder, you can press the remote
controller’s CUSTOM PICT. button to open the [
/
!
Custom Picture] menu.
- If a protected custom picture file is selected on the camcorder, custom picture related settings cannot be
changed using the remote controller.
- Adjusting custom picture related settings using the remote controller will change the settings registered
under the currently selected custom picture file. If you want to keep an important custom picture file, copy it
in advance to an SD card or select in advance a custom picture file you do not mind changing.
Editing a Cu s tom Picture File’ s S etting s
1 S elect a cu s tom picture file (
A
121).
2 Turn off the pre s et color s etting s .
>
[
/ !
Custom Picture]
>
[Preset]
>
[Off]
3 If nece ss ary, change the gamma curve, color s pace and/or color matrix (
A
124).
>
[
/ !
Custom Picture]
>
[Gamma], [Color Space], [Color Matrix]
4 S elect the de s ired s etting and then pre ss S ET.
5 To change the cu s tom picture’ s detailed s etting s , activate the cu s tom picture’ s detailed s etting s .
>
[
/ !
Custom Picture]
>
[Activate Other Settings]
>
[On]
Operating modes: