background image

Convergence & Divergence

Binocular Vision and Parallax are the primary visual tools animals use to perceive 

depth

 at close 

range

.

 

 

The wider an animal’s eyes are apart (its 

interocular

 distance) the deeper its binocular depth 

perception or “

depth range

.”

At greater distances we start to use monocular depth cues like perspective, relative size, occlusion, 

shadows and relation to horizon to perceive how far away objects are from us.

Of course it would be di

cult to look at double images all day so instead our eyes naturally angle in 

towards the object of interest to make it a single image.  This is called 

convergence

.

Here’s an example of how your eyes use convergence in the real world.

 

 Hold a pen about one foot in 

front of your face and look directly at it.

 

 You will feel your eyes both angle towards the pen in order 

to converge on it, creating a single image of the pen.

 

 What you may not immediately perceive is that 

everything behind the pen appears as a double image (diverged.)

 

 Now look at the background 

behind the pen and your pen will suddenly appear as two pens because your eyes are no longer 

converged on it.

 

 This “double-image” is 

retinal disparity

 at work and it is helping your brain determine 

which object is in front of the other. 

What never happens to your eyes in the natural world is 

divergence

, which would mean that your 

eyes would angle outward.  This is because the furthest point you could possible attempt to look at is 

at in

fi

nity and even in

fi

nity would only require that your eyes be angled perfectly parallel to each 

other.   This is why stereographers should avoid background parallax values in their scene that may 

require the eyes to diverge when viewed.  This is easy to keep in check through some simple math 

but we will cover that a little later.

            

                                                      

           

Converged Eyes                                                                    Diverged Eyes

XF300/305 Whitepaper                

   

 

 

       

   

 

 

   Stereoscopic 3D

Tim Dashwood

3

Содержание XF105


















Отзывы: