Canon WUX7000Z, Руководство пользователя

Страница: 194 / 240

Menu Description
194
PJLink
> [Network settings] > [PJLink]
You can enable or disable the PJLink network function of the projector.
When the function is turned on, control is possible via the network using commands
that meet PJLink standards.
Sources and corresponding input terminals
Option Function
Off Disables the PJLink function.
On Enables the PJLink function.
• The projector conforms to Class 2 as defined in PJLink standards established by the
Japan Business Machine and Information System Industries Association (JBMIA). This
projector supports all commands that are defined by PJLink Class 2, and PJLink
compatibility has been verified.
- The port number for PJLink command transmission is 4352 (TCP).
- The port number for PJLink device searching is 4352 (UDP).
- For details on using PJLink, see “Setting PJLink [PJLink]” ( P213 ).
Input source number Input signal name
11 Analog PC-1
12 Analog PC-2
13 Component
31 Digital PC
32 HDMI
33 DisplayPort
41 USB
51 LAN
52 HDBaseT
What is PJLink?
It allows centralized control of projectors and operation from a controller for all projectors
regardless of manufacturer.
The objective is for JBMIA to improve convenience for users and expand the use of
projectors through early systemization for network monitoring and control of projectors,
which will become the mainstream in the future.
Class 1: Standardization of control and monitoring specifications for basic projector
functions
Class 2: Standardizes commands added to Class 1, device searching, state notification,
and IPv6 support.
For PJLink specifications, visit the Japan Business Machine and Information System
Industries Association website.
PJLink website: http://pjlink.jbmia.or.jp/english/