Canon WUX7000Z, Руководство пользователя

Страница: 174 / 240

Menu Description
174
Other settings
> [System settings] > [Other settings]
Register a password, set a password, reset the air filter counter, schedule
operation, and access other settings and information.
Password settings
Disables the projector unless the correct password is entered.
Option Function
Off The projector can be used even if no password is entered.
On The projector cannot be used unless you enter your password.
To Cancel the Password
Cancellation
on the
Projector
Turn off the projector and unplug the power plug.
Hold down the
MENU button on the side control and connect the power
plug. Make sure to keep holding down the MENU button until a beep
sounds. When the projector beeps, the password is canceled. (The
entered password is also reset.)
Cancellation
on the Remote
Control
To forcibly cancel the password from the remote control, in standby state
press the
MENU button 3 times, then press the POWER button.
• You cannot set [On] unless you have completed [Register password].
Once you set a password, the password entry screen appears at power-on.
Enter a 4 digit password.
Enter the password using the [ ] / [ ] / [ ] / [ ] buttons or number buttons on the
remote control.
If the password is valid, the projection starts. If you enter a wrong password three
times, the power will be turned off.
• The projector also goes off after three minutes of inactivity on the password input
screen.