WUX6500 (10/14)
●
Analog PC input (1, 2)
●
Component video input
Signal format
Horizontal
frequency
[KHz]
Vertical
frequency
[Hz]
Dot clock
[MHz]
Signal format
Horizontal
frequency
[KHz]
Vertical
frequency
[Hz]
Dot clock
[MHz]
640×480 31.469 59.940 25.175 480i 15.734 59.940 13.500
720×480 31.469 59.940 27.000 480p 31.469 59.940 27.000
720×576 31.250 50.000 27.000 576i 15.625 50.000 13.500
800×600 37.879 60.317 40.000 576p 31.250 50.000 27.000
848×480 31.020 60.000 33.750 720p 37.500 50.000 74.250
1024×768 48.363 60.004 65.000
45.000 60.000 74.250
1280×768 47.776 59.870 79.500 1080i 28.125 50.000 74.250
47.396
59.995
68.250
33.750
60.000
74.250
1280×800 49.702 59.810 83.500 1080p 56.250 50.000 148.500
49.306
59.910
71.000
67.500
60.000
148.500
1280×960 60.000 60.000 108.000 1080PsF 27.000 24.000 74.25
1280×1024 63.981 60.020 108.000
28.125 25.000 74.25
1366×768 47.712 59.790 85.500
33.750 30.000 74.25
1400×1050 64.744 59.948 101.000
Analog/digital PC signals in this specification refer to RGB
video signal. This is because signals that are outputted
from PC in most cases are in that format.
Component video/digital video signals in this specification
refer to color-difference signal because signals that are
outputted from video equipment in most cases are in that
format.
Please note that Composite video and S video signals are
not included.
65.317
59.978
121.750
1440×900 55.935 59.887 106.500
55.469
59.901
88.750
1600×900 60.000 60.000 108.000
1600×1200 75.000 60.000 162.000
1680×1050 64.674 59.883 119.000
65.290
59.954
146.250
1920×1080 56.250 50.000 148.500
67.500
60.000
148.500
1920×1200 74.038 59.950 154.000
Specifications in above charts are subject to change without notice.
Notes: If the analog PC signal of the dot clock is greater than 162MHz, the images are not projected correctly.
Use VGA cable with all pins connected. Images may not project properly if the correct VGA cable is not used.
USB video signal (only for still images)
Images that are stored in a USB memory can be projected as still images by inserting the USB
memory into the projector.
File type
JPEG
Format
Standard DCT method (Baseline)
Max. pixels
10912 x 8640
Only JPEG files can be read by the projector with maximum pixels of 10912 x 8640.
It also supports Standard DCT method (baseline) format. Optimized, progressive and reversible
methods are not supported.
Note that when JPEG still image is inputted, digital zoom operation from display menu will not be
supported.
Slideshow setting for video input via USB is done from the video setting menu; use USB file browser
to display the video input via USB.
Network video input (only for still images)
The projector will receive still images from a computer (when NMPJ in operation) via LAN network.
Still images are output to the projector by converting the image to the number of pixels of the LCOS
device used for the projector.