WUX500ST (9/18)
3-2 .HDBaseT specifications
HDBaseT is used to transfer video signal and network data. Below image shows the
connections for HDBaseT; note that the WUX500ST is equipped with a receiver so no extra
receiver is needed.
●For video signals (HDMI cable is used for connection
①
)
①
Video signal is sent to the transmitter from an output device such as Blu-ray player.
②
Transmitter then converts the video signal into HDBaseT signal and sends out.
③
Receiver receives the HDBaseT signal and converts to an HDMI signal and sends out.
④
Display device will display the HDMI signal.
●For network communications (Network cable is used for connection
①
)
①
Network data is sent to the transmitter from a secured network.
②
Transmitter then converts the network data into HDBaseT signal and sends out.
③
Receiver receives the HDBaseT signal and converts to a network data and sends out.
④
Network data from a display device can transmit in the same manner in reverse direction.