Canon Wireless Transmitter WFT-E5A, Инструкция по эксплуатации

Страница: 96 / 132

96
Connecting GPS Devices via Bluetooth
5
Select [OK].
After the Bluetooth unit is attached to the
transmitter, the transmitter’s <
USB > lamp blinks in
green and a message is displayed indicating that a
connection has been established.
When the confirmation message is displayed, select [ OK ].
X At this point, the menu option [ Disconnect ]
becomes available. Select this option before
detaching the GPS device.
6
Establish a wireless connection between
the GPS device and Bluetooth unit.
Turn on the GPS device and activate Bluetooth® on it.
Select [ Bluetooth device connection ].
X Nearby Bluetooth® devices in use are listed. (Only
GPS devices can be connected.)
7
Select the GPS device.
Press < 0 > to display the connection status of
Bluetooth® devices.
Pressing < 0 > when the status is [ Not conn. ] will
list nearby Bluetooth® devices in use.
Turn the <
5
> dial to select [ GPS ] , and then
press <
0
>.
Select [ OK ] and press < 0 >.
If a Bluetooth® password has been set on the
GPS device, a password input screen is displayed.
Enter the password.
X
The transmitter now starts to establish a
connection with the GPS device.
It may take a few minutes to establish a
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.
COP
Y