manualshive.com logo in svg

Canon W8400 Series, Руководство по обслуживанию, Страница: 131 / 224

Поделиться
Скачать
Canon W8400 Series Скачать руководство пользователя страница 131

Chapter 4

4-31

If all of the ink passages are opened (no ink tank is installed, the ink supply valve is opened, and the print head lock lever is opened) when an ink tube is

filled with ink, the ink in the ink tube may reverse-flow due to the difference in the water head, and ink may leak from the ink supply needle. Therefore,

do not open all of the ink passages at the same time when the ink tube is filled with ink.

F-4-68

c) Draining the ink manually 

Step 1

1)  Remove the right circle cover (L), right circle cover (S), right side cover, upper right cover, and right cover unit. Refer to 

DISASSEMBLY/

REASSEMBLY > Points to Notes on Disassembly and Reassembly > Outer covers.

2)  Remove the ink tank.

3)  Move the carriage over the platen. Refer to 

DISASSEMBLY/REASSEMBLY > Points to Notes on Disassembly and Reassembly > Opening the

caps and moving the wiper unit.

4)  Remove the joint [1] for the ink tube unit and the joint [2] for the ink tank unit. Insert the ink-tube-unit-side joint [1] in the ink supply base having an

ink absorber [3] so that the joint is not disconnected accidentally. 

5)  Unlock the print head lock lever to allow the ink for all six colors in the ink tubes to flow simultaneously to the ink absorber [3].

Step1

Sub-buffer

Ink supply valve

Joint

Joint

Carriage unit

Print head

Step2

Step1

Step1

Step1

Step2

Ink supply mount

Содержание W8400 Series

































































































































































































































Отзывы:

Нет отзывов