Canon VB-H610D, Руководство по эксплуатации

Страница: 62 / 173

62
Video Record Setting
(1) [Video Record Action]
Select the destination of a video recorded when an
event occurs. To record to a server selected on the
[Upload] in the setting page, select [Upload] and to
record to an SD card inserted in the camera, select
[Record to SD Card].
Note
The size and format of video recorded according to the [Video
Record Action] settings are as follows:
Settings must be made in the above setting page to make
an actual video recording.
Volume Detection
(1) [Volume Detection Event]
Set volume detection to [Disable] or [Enable].
(2) [Detection Criteria]
Set the criteria for generating volume detection events
to [The reference volume level or above] or [The
reference volume level or below].
(3) [Reference Volume Level]
Set the reference volume level for detection in the
range of 0 to 100.
Perform an actual test at the volume level before
setting the value.
(4) [Detect Criteria Duration (sec)]
Set the duration of the detect criteria in the range of 0
to 10 (sec.). When the status meeting the detect
criteria has continued for the duration or longer, an
ON event is generated.
(5) [ON Event Operation]
Select the operation to be performed upon an ON
event. If [Enable] is selected, (7) [Preset], (8) [Video
Record] and (9) [E-mail Notification] will be executed
according to their settings upon an ON event.
(6) [OFF Event Operation]
Select the operation to be performed upon an OFF
event. If [Enable] is selected, (7) [Preset], (8) [Video
Record] and (9) [E-mail Notification] will be executed
according to their settings upon an OFF event.
(7) [Preset]
If a preset is specified, the camera will orient
automatically to the specified preset position when a
volume detection event occurs. To use presets, it is
necessary to set the presets with the Preset Setting
Tool under Admin Tools (p. 94). If there is no need for
additional camera operation, select [None].
(8) [Video Record]
Specify the video record action. If [Enable] is
selected, video will be transmitted to the destination
selected in [Video Record Action] (p. 62) when a
volume detection event occurs.
[Event]
Setting Video Record, Volume Detection, Audio Playback and Timer
The following can be set here.
• Video Record S etting
Set where video is recorded when an event
occurs.
• Volume Detection
Set the operation to be performed at the time of
volume detection.
• External Device Output
Set external device output.
• External Device Input
Set the operation to be performed when an event
is triggered by input from an external device.
• Timer
Set timer events.
• S ound Clip Upload
Set the audio file registered as playback.
[Video Record
Action] settings
Applied video format Applied video size
[Upload] [Video Format]
settings in the
[Upload] menu
When the video format is
[JPEG], [JPEG] > [Video
Size: Upload / SD card] in
the [Video] menu
When the video format is
[H.264], [H.264] > [Video
Size] in the [Video] menu
[Record to SD
Card]
[Video Format]
settings in the
[Memory Card] menu