Canon TS7450i Series Скачать руководство пользователя страница 134 | Manualshive

Страница: 134 / 455

Canon TS7450i Series Скачать руководство пользователя страница 134

• Do not install the printer in locations that get very hot (direct sunlight, or close to a heating source),

very humid or dusty locations, or outdoors.

• Do not place the printer on a thick rug or carpet.
• Do not place the printer flush against a wall.

Power Supply

• Keep the area around the power outlet clear at all times so you can easily unplug the power cord if

necessary.

• Never remove the plug by pulling on the cord.

General Notices

• Do not tilt the printer, stand it on end, or turn it upside down. This may cause ink to leak.
• Do not place anything on top of the printer. Be especially careful to avoid metal objects such as

paper clips and staples, and containers holding flammable liquids such as alcohol or thinner.

• Be sure to observe the following when loading the original on the platen. Failure to observe the

following may cause the scanner to malfunction or the platen glass to break.

◦ Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
◦ Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as pressing down

the original.

• Do not attempt to open, disassemble or modify the FINE cartridges. Ink may leak and damage your

printer.

• Do not throw FINE cartridges in the fire.

134

«
...
132
133
134
135
136
...
»

Содержание TS7450i Series








































































































































































































































































































































































































































































Отзывы:

Нет отзывов