Canon Stacker-C1, Руководство пользователя

Страница: 30 / 40

Error Messages 3-3
T
roubleshooting
3
Error Message Chart
Error Message Cause Remedy
CLOSE COVER
TOP COVER The top cover is open. Close the top cover .
CLOSE COVER
OUTPUT TRAY COVER The OUTPUT TRAY cover is
open. Close the OUTPUT TRAY cover
.
REMOVE PAPER FROM
OUTPUT TRAY The OUTPUT TRAY is full. Remove the paper from the OUT-
PUT TRAY.
REMOVE PAPER FROM
STACKER The stack tray is full. Remove the paper from the stack
tray.
UNEVEN STACK
REMOVE STACKER PAPER
/
IF PAPER IS CURLED
PERFORM CURL ADJUST.
1. The paper is curled.
2. Paper on the stack tray is
leant.
Check the message displayed on
the host machine (printer) control
panel.
STACK TRAY NOT SET The stack tray is not placed cor-
rectly. Place the stack tray correctly.
CLOSE GUIDE
STACK GUIDE F. COVER Front cover is closed without
closing the front stack guide
.
Open the front cover and close
the front stack guide
, then
close the front cover.
REMOVE JAMMED PAPER
B A paper jam occurred in B
section.
Open the top cover and open
the B guide to remove the
jammed paper. Close the guide
and the cover, and the printing
will be restarted. *1
REMOVE JAMMED PAPER
A A paper jam occurred in the A
section.
Open the OUTPUT TRAY cover
and open the A guide to
remove the jammed paper. Close
the guide and the cover, and the
printing will be restarted.
2
1
3
D2 E2
D4
D1
D3
B
A
E1
C
D5
When you remove the
sheets from the left
turn-over section, take
care not to be caught
by the roller. Other-
wise, it may lead to
severe injury.
When you remove the
sheets from the stack-
ing section, take care
not to be caught
between the stack
guide and the stack
tray. Otherwise, it may
lead to severe injury.
WARNING
1
2
3 3
1
2