Canon Speedlite Transmitter ST-E2, Инструкция по эксплуатации

Страница: 11 / 56

10
With two slave units, you can vary the flash ratio and shoot with E-TTL
II autoflash.
To put the two slave units into two slave groups, set a different slave ID
for both slave units. To set the slave unit’s slave ID, see the Speedlite’s
instruction manual. Set the left slave unit’s ID to A, and the right slave
unit’s ID to B.
Flash Ratio with E-TTL II
Set the Slave Unit
A
B
10m (32.8ft.)
8m (26.2ft.)
80°
12m (39.4ft.)
15m (49.2ft.)
Indoors
Outdoors
If you set the slave ID to C, the slave unit will not fire.
ST-E2_E.fm Page 10 Tuesday, May 9, 2006 2:37 PM