background image

8

Safety Instructions

Be sure to read these instructions in order to operate the product 

safely.

Follow these instructions to prevent injury or harm to the operator of 

the product or others.

 

WARNING

Denotes the risk of serious injury or death.

 

o

 Use only power sources specified in this instruction manual for use with the 

product.

 

o

 Do not disassemble or modify the product.

 

o

 Do not expose the product to strong shocks or vibration.

 

o

 Do not touch any exposed internal parts.

 

o

 Stop using the product in any case of unusual circumstances such as the 

presence of smoke or a strange smell.

 

o

 Do not use organic solvents such as alcohol, benzine or paint thinner to clean 

the product.

 

o

 Do not get the product wet. Do not insert foreign objects or liquids into the 

product.

 

o

 Do not use the product where flammable gases may be present.

This may cause electric shock, explosion or fire.

 

o

 Observe the following instructions when using commercially available batteries 

or provided battery packs.

• 

Use batteries/battery packs only with their specified product.

• 

Do not heat batteries or expose them to fire.  

•  Do not charge batteries/battery packs using non-authorized battery chargers.

•  Do not expose the terminals to dirt or let them come into contact with metallic 

pins or other metal objects.

•  Do not use leaking batteries/battery packs.

•  When disposing of batteries/battery packs, insulate the terminals with tape or 

other means.

This may cause electric shock, explosion or fire.

If a battery/battery pack leaks and the material contacts your skin or clothing, 

flush the exposed area thoroughly with running water. In case of eye contact, 

flush thoroughly with copious amounts of clean running water and seek 

immediate medical assistance.

 

o

 Do not allow the product to maintain contact with the same area of skin for 

extended periods of time during use. 

This may result in low-temperature contact burns, including skin redness and 

blistering, even if the product does not feel hot. The use of a tripod or similar 

equipment is recommended when using the product in hot places and for people 

with circulation problems or less sensitive skin.

Содержание Speedlite EL-100

































































Отзывы: