Canon SPEEDLITE 430EX, Инструкция по эксплуатации

Страница: 12 / 116

11
When you set the camera’s shooting mode to <
V
> (Program AE) or
<
U
> (Full Auto), E-TTL II/E-TTL fully automatic flash will make it as
easy as normal AE shooting.
1
Set the Speedlite to <
a
>.
Press the <
D
> button so that
<
a
> is displayed.
2
Focus the subject.
Press the shutter button halfway to focus.
X
The shutter speed and aperture will
be set as displayed in the viewfinder.
Check that the <
Q
> icon is lit in the
viewfinder.
3
Take the picture.
Take the picture.
X
A preflash is fired right before the shot
is taken, then the main flash is fired.
X
If a standard flash exposure was
obtained, the flash exposure confirmation
lamp will light for about 3 sec.
Fully Automatic Flash Shooting
If the lens focal length blinks on the LCD panel, the periphery of the flash
picture may turn out dark. Use the built-in wide panel (p.18).
<
a
> will be displayed on the LCD panel even if the camera is
compatible with E-TTL II.
If the flash exposure confirmation lamp does not light, move closer to the
subject and take the picture again. With a digital camera, you can also
increase the camera’s ISO speed.
A52_E.book Page 11 Friday, June 10, 2005 4:40 PM
COP
Y