Canon Shift Tray-D1, Руководство по обслуживанию

Страница: 43 / 46

Chapter 4
4-3
F-4-6
Memo: If 'ON' is not indicated after moving the sensor
closest to the paper, keep adding a sheet of paper until
'ON' is indicated.
F-4-7
7)Perform step 6) for the other sensor.
8)Press the Stop key to end the adjustment.
1.When moving the sensor (front, rear), be sure to do
so starting from where it is farthest from the paper.
This is important in respect of the characteristics of
the sensor.
2.Be sure that the grounding terminal of the sensor
(front, rear) is parallel to the sensor and, moreover, its
bend is in downward direction.
F-4-8
[1]
Grounding wire terminal