145
Service Call Display
In Case of LBP5900
When a problem has occurred and the printer does not work properly, the following
service call appears.
1
Turn the printer OFF, wait for 10 seconds or longer, and then
turn it ON again.
If the message does not reappear, the printer can be used as it is. If the message
still appears, proceed to the next step.
Message
Cause
Remedy
(n indicates alphanumeric
characters)
A problem has
occurred inside
the printer.
Cycle the power of the printer using the following
procedure. If the message does not disappear
regardless of cycling a few times, contact your
local authorized Canon dealer.
(n indicates alphanumeric
characters)
A problem has
occurred in the
fixing unit of the
printer.
Follow the instructions 2 or later, and contact your
local authorized Canon dealer.
Ennn-nnnn
E001-nnnn
E003-nnnn
ON
OFF
Содержание Satera LBP-5600
Страница 1: ...Laser Beam Printer User s Guide User s Guide ...
Страница 51: ...50 1 Pull the paper cassette out Pull the paper cassette out until it stops a a ...
Страница 113: ...112 Right side of the ITB unit inside the printer Drum cartridge guides High voltage contacts High voltage contacts ...
Страница 135: ...134 2 Hold the tab on the wasted toner cover and open the wasted toner cover 3 Remove the waste toner container Tab ...