Canon Satera LBP-3910 Скачать руководство пользователя страница 97 | Manualshive

Страница: 97 / 97

Canon Satera LBP-3910 Скачать руководство пользователя страница 97

96

32 リョウメンインサツエ

ラー

<Auto Error Skip>

Cause

The printer received data for 2-sided printing of a
paper size (including the paper orientation) or
paper type on which the printer cannot perform
automatic 2-sided printing.

Remedy

Press [

オンライン

] to continue printing. However,

the data on each side is printed on two pages.

41 ヨウシサイズカクニン

Cause

The size of the paper loaded in the multi-purpose
tray is different from the setting for <

テザシトレイ

ヨウシサイズ

> specified from the computer or

control panel.

Remedy

Match the size specified in <

テザシトレイヨウシサ

イズ

> and the size of the loaded paper, and then

press [

オンライン

].

Cause

You are using LIPS LX Printer Driver, and you
loaded custom size paper of its long edges 312.0
mm (297.0 mm for a paper cassette) or less and
printed.

Remedy

Load the paper in landscape orientation, then
print again.

96 サブハイシトレイカクニン
／シメテクダサイ

Cause

Paper was to be output with the printed side
facing up during automatic 2-sided printing.

Remedy

Close the sub-output tray. The printer resumes
printing, and the paper is output to the output tray.

9F トナーカクニン

<Warning Message>

Cause

There is a possibility that a used toner cartridge
that has reached its lifetime is installed.

Remedy

Check if the toner cartridge is proper.

PC XXX ヨウシニコウカン

(xxx indicates abbreviations
of paper sizes)

Cause

The paper of the size specified in the application
is not loaded in the paper cassette or
multi-purpose tray, or the paper source for the
different paper size is selected.

Remedy

Load the paper of the size selected in the
application (or the one specified by scaling
factors).

Message

Cause and Remedy

«
...
95
96
97

Содержание Satera LBP-3910


































































































Отзывы:

Нет отзывов