Canon Saddle Finisher-AF2, Руководство по обслуживанию

Страница: 136 / 244

Chapter 4
4-26
F-4-110
3) Remove the E ring [1], belt mount [2], belt [3], gear [4], square pin [5],
ring [6], and plate [7].
F-4-111
4) Remove the ball bearing [1], 2 washers [2], 2 E rings [3], and ball bearing
[4].
F-4-112
5) Remove the ball bearing [1] in the lower direction, and remove the stack
delivery roller [2].
F-4-113
6) Remove the E ring [2] and ball bearing [3] from the stack delivery roller
[1].
F-4-114
4.4.3 Process Tray Assembly
4.4.3.1 Preparation for Removing the Process Tray
Assembly
0020-8581
1) Remove the stack wall (upper). (page 4-8) Reference[Removing the
Stack Wall (Upper)]
2) Remove the stack wall (lower).
(page 4-8)
Reference[Removing the
Stack Wall (Lower)]
4.4.3.2 Removing the Process Tray Assembly
0020-8585
1) While holding the tray, insert the driver [2] to the hole in the lower side
[1], release the cam [3] as the direction of the arrow [A], lift down the
tray B [4] to the lowest position.
[1]
[7]
[1]
[2]
[3]
[4]
[5]
[6]
[1]
[2]
[2]
[4]
[3]
[1]
[2]
[1]
[2]
[3]