Canon S600, Быстрый старт, Страница: 42 / 48

38
Appendix
Turning Off the Printer Turning Off the Printer Turning Off the Printer Turning Off the Printer
To avoid printer malfunction always use the POWER button to turn the printer on and off. Never remove the
power cord from the power outlet until you have turned off the printer by pressing the POWER button. After the
POWER/ERROR light goes out, you can unplug the power cord from the power outlet.
Using the Printer Near Appliances and Fluorescent Lamps
Using the Printer Near Appliances and Fluorescent Lamps Using the Printer Near Appliances and Fluorescent Lamps
Using the Printer Near Appliances and Fluorescent Lamps
Allow at least 6 inches clearance between the printer and another appliance or a fluorescent lamp. Electrical
noise generated by a fluorescent lamp placed too close to the printer could cause the printer to malfunction.
Regulatory Information Regulatory Information Regulatory Information Regulatory Information
Color Photo Printer Model: K10198 Color Photo Printer Model: K10198 Color Photo Printer Model: K10198 Color Photo Printer Model: K10198 (S600) (S600) (S600) (S600)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
2995 Red Hill Avenue
Costa Mesa, CA 92626
1-800-423-2366
Canadian Radio Interference Regulations Canadian Radio Interference Regulations Canadian Radio Interference Regulations Canadian Radio Interference Regulations
This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set
out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry
Canada.
Cet appareil numérique respecte les limites de bruits radio éléctiques applicables aux appareils numériques de
Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003 édictée par
l’Industrie Canada.