10
3-3 Service Mode Operations
Though the service mode opration is the same as S520, only the method of the market area setting is
defferent from the S520.Refer to the figure1.
All the logic boards available as a replacement part contain printer settings for the BJ S530. Therefore, if the
logic board was re plased, be sure to set the correct printer settings.
Fig1
：
Functions of the S530D Service mode S530D
Press Indicator
Function
0 times
Green
Power off (Even if there is no print head mounted,the
carriadge will return to the home position and lock.)
1 time
Orange
Service/factory test printout(Including ink sensor check)
2 times
Green
EEPROM information printout
3 times
Orange
EEPROM initialization
4 times Green
Clears the waste-ink counter
Waste-ink counter settings
After press the POWER button, reaching this service
function. Press the RESUME button the number of times
specified below to set the destination.
Setting
0 times
1 time
BJ S530
2 times
BJ S530
3 times
4 times
S530D
5 times
BJ 535PD
5 times
Orange
More than
6 times
Green
