Canon RM-Lite, Руководство администратора

Страница: 7 / 138

7
The flow from preparation before introducing the system, to operation management and maintenance is shown below.
Setup Flow
Step 1 Consider the video storage period and recording conditions, determine
the hard disk capacity required for recording and prepare the
equipment.
S ee “ S ystem Design” in Chapter 1: Introduction.
Prepare for introducing the system
Step 2 Set up your cameras for live image display or recording.
S ee your camera manuals.
Set up your cameras
Step 3 Install this software product on your computer.
S ee Chapter 2: S etup.
Install
Step 4 Set up the Storage Server Group and Storage Servers.
S ee Chapter 3: S torage S erver S ettings.
Set up the Storage Servers
Step 5 Add cameras to the Storage Server Groups.
S ee Chapter 3: S torage S erver S ettings.
Add cameras
Step 6 Configure the Viewer to match your environment and use.
S ee Chapter 4: Viewer S ettings.
Configure the Viewer
Step 7 Set the recording conditions for using the cameras, including regular
recording and motion detection recording.
S ee Chapter 5: S etting a Recording S chedule.
Set a recording schedule
Step 8 Control cameras while viewing live images, check events, and play
back recorded images. You can set up your own layouts for the video
windows.
S ee Chapter 6: Day-to-Day Operations.
Day-to-day operation
Step 9 We recommend that you set up a management and maintenance
process, such as taking regular backups of recording files, to reduce
the impact of network failures on system operation.
S ee Chapter 7: Operation and Management and Chapter 8:
Backup.
Operation management and
maintenance