Canon RF24-240mm F4-6.3 IS USM, Инструкция по эксплуатации

Страница: 11 / 17

ENG-10
Set the image stabilizer switch to ON when you
want to use the Image Stabilizer.
z
This function provides image stabilization
appropriate for shooting conditions (such as
shooting still subjects and panning shots).
z
The Image Stabilizer will work in combination
with cameras with in-body Image Stabilizer.
*
Lens firmware: ver.1.0.6 or over.
z
Set the image stabilizer switch to OFF when
you are not going to use the Image Stabilizer.
5. Image Stabilizer
z
The Image Stabilizer cannot compensate for a
blurred shot caused by a subject that moved.
z
The Image Stabilizer may not be fully effective if
you shoot from a violently shaking vehicle or other
transportation.
z
The Image Stabilizer operates for about two
seconds after turning off the camera. Do not
detach the lens during that time. This may cause
the lens to malfunction.
z
When using a tripod, it is recommended that you
set the image stabilizer switch to OFF.
z
Even with a monopod, the Image Stabilizer will
be as effective as during hand-held shooting.
However, depending on the shooting conditions,
there are cases in which the Image Stabilizer
effect may be less effective.