background image

ENG-11

This function provides image stabilization 

appropriate for shooting conditions (such as 

shooting still subjects, panning shots, and 

closeup (macro) shooting).

Set the image stabilizer switch to ON when you 

want to use the Image Stabilizer.

 

z

 Set the image stabilizer switch to OFF when 

you are not going to use the Image Stabilizer.

6.  Image  Stabilizer

 

z

 The shorter the focusing distance is, the less the 

image stabilizer effect.

 

z

 The Image Stabilizer cannot compensate for a 

blurred shot caused by a subject that moved.

 

z

 The Image Stabilizer may not be fully effective if 

you shoot from a violently shaking vehicle or other 

transportation.

 

z

When using a tripod, it is recommended that you 

set the image stabilizer switch to OFF.

 

z

 Even with a monopod, the Image Stabilizer will 

be as effective as during hand-held shooting. 

However, depending on the shooting conditions, 

there are cases in which the Image Stabilizer 

effect may be less effective.

 

z

When shooting a still subject, it compensates for 

camera shake in all directions.

 

z

 It compensates for vertical camera shake during 

panning shots in a horizontal direction, and 

compensates for horizontal camera shake during 

panning shots in a vertical direction.

Содержание RF100mm F2.8 L MACRO IS USM























Отзывы: