Canon RF 10-20mm F4 L IS STM, Инструкция по эксплуатации

Страница: 16 / 20

ENG-15
Filters (Sold separately)
2
Insert the filter from the left or right of the holder, and get it all within the projections on
both sides.
Filter indicators Projections Bevel
Gelatin filter Contacts
z
Insert the filter into the holder so that the bevel is on the
bottom right as shown in the figure on the left.
z
Insert the filter so that it passes above the projections on the
left and right.
With a full-frame filter in place
Projection Projection
With an APS-C filter in place
Projection Projection
z
Fit filter between the projections on the left and right.
z
Check that the filter bevel is at the bottom right of the
contacts.
z
Image ghosting may occur as a result of using a gelatin
filter. Also ensure that there is no dust or scratches on the
gelatin filter.
z
When inserting a gelatin filter, ensure that you do not touch
the rearmost lens element.