WUX5000 / WUX4000 User Commands
- 60 -
SAVEIMGPROF
Create, save, delete user memory / Create user memory status
Format
SAVEIMGPROF=<User memory save to parameter:ID>
<User memory save to parameter:ID>
USER_1
Save to User 1
USER_2
Save to User 2
USER_3
Save to User 3
USER_4
Save to User 4
USER_5
Save to User 5
DEL_ALL
Delete all User memory
<User memory presence parameter:ID>
0
User memory not created
1 User
memory
created
Environment
Power
Input
OFF ON
PM
D-RGB A-RGB
COMP
HDMI
None
X
O
X
O O O O O
Response
"i:OK" is returned if the user memory was saved properly.
For '
GET SAVEIMGPROF
' or '
?SAVEIMGPROF
', presence of user memory can be confirmed as
'g:SAVEIMGPROF=<Number of user memories>:<User 1 present parameter>,
<User 2 present parameter>,<User 3 present parameter>,
<User 4 present parameter>,<User 5 present parameter>'
For details on other responses, refer to the "Error List".
Description
(1) This command is used to create user memory.
(2) This command functions in the same way as "Image adjustment" - "Create user memory " and
"Save user memory".
(3) The create user memory status can be confirmed using the GET SAVEIMGPROF command
("
GET SAVEIMGPROF
").
Example
Setting
> SAVEIMGPROF=USER_2
Saves the current image adjustment value to user memory 2.
< i:OK
Reference
> GET SAVEIMGPROF
Confirms the create user memory status.
< g:SAVEIMGPROF=5:0,1,1,0,0
User memory 3 and user memory 3 have been created.
* Commands are indicated by ">", and responses are indicated by "<".
