8
Turning On the Remote Controller
1 Turn on the camera.
• Depending on the camera used, you may need to activate the remote controller using
the camera’s menu. For details, refer to the camera’s instruction manual.
• The remote controller will turn on and the CAMERA POWER button will light up in
green.
• Immediately after activating the remote controller, all the controls will be locked.
2 Remote controller: Press the ACTIVE button repeatedly to change the key lock
mode as necessary (
A
16).
Disconnecting the Remote Controller
1 Turn off the camera.
2 Disconnect the cable from the remote controller’s REMOTE A or REMOTE B
terminal and from the corresponding terminal on the camera.
• To disconnect the optional 8-pin remote cable, pull back the metallic tip of the plug
and then disconnect the cable from the terminal.
