Canon RC-IP1000, Руководство пользователя

Страница: 63 / 94

63
System
S etting item S etting values/description
Initial Screen Status , USER 1-10, Camera List, Control, Preset List
Selects the top menu’s screen to be displayed at startup.
Language English , 日本語
Selects the displayed language.
Operation Mode Selects functions that can be operated, in order to prevent accidental operation.
Full Control : All operations are possible.
Camera Control: Allows control for all camera settings.
PTZ Control: In addition to the PTZ operator, PTZ-related settings such as preset/
trace editing are available.
PTZ Operator: Only pant/tilt/zoom/focus/iris controls can be operated.
PoE+ Restrictions Selects restricted functions when using PoE+ to supply power to the device.
Disable Rear USB : The rear USB terminal cannot be used.
LCD/LED Bright. Restrict.: [LCD Brightness] and [LED Brightness] are restricted to
a maximum value of 15 and 10 respectively.
LCD Brightness 1 to 20 ( 10 )
Selects the brightness of the LCD panel.
LED Brightness 0 to 15 ( 7 )
Selects the brightness of self-illuminated buttons.
Operation Volume 0 to 5 ( 2 )
Selects the operation volume.
SDI Output Selects the SDI OUT terminal’s output video selection method.
Through: Outputs SDI video as is (no onscreen displays).
Auto (SDI Priority) : If there is SDI input video, it is output. If there is no SDI input
video, IP input video is output.
Auto (IP Priority): In case of IP camera connection, IP input video is output. Other-
wise, SDI input video is output.
HDMI Output Selects the HDMI OUT terminal’s output video selection method.
SDI: SDI input video is output as is. Superimposing onscreen displays (focus
frame, cropping frame) is possible.
Auto (SDI Priority) : Same as [SDI Output].
Auto (IP Priority): Same as [SDI Output].
Export Saves device settings information (rcip1000.dat) to the USB memory.
Settings that are not recorded when the power is turned off are not saved.
Import Target All , Non-Network
Selects which settings loaded from the USB memory are applied to the device. If
[Non-Network] is selected, all settings are applied except for those of the [Network]
tab.
Import Loads settings information (rcip1000.dat) stored on the USB memory and updates
the device’s settings.
Initialize Resets the device to default settings.
Update Firmware Updates the device’s firmware.
LCD White Balance R Gain, G Gain, B Gain: -100 to 0 ( 0 )
Adjusts the LCD panel’s white balance.