Canon Puncher Unit-BE1, Руководство по обслуживанию

Страница: 53 / 58

4
4
4-15
4-15
Installation Procedure > When installing to the saddle finisher
Installation Procedure > When installing to the saddle finisher
10) Push back the saddle stitcher unit gently
into the finisher until it stops.
F-4-34
Caution:
Hold the punch unit as shown by the following illustration. Do not
hold the motor gear assembly.
F-4-35
11) Remove the two scews of the supplied punch unit, and then
remove the punch front cover.(The removed screws and the
punch front cover are no longer required.)
x2
F-4-36
12) Attach the supplied punch unit to the saddle finisher by matching the hole on the front side of
the punch unit with the pin on the finisher.
F-4-37
13) Attach the supplied punch unit fixing pin (for saddle finisher), and then secure
it with the supplied screw (TP, M3 x 6).
x1
F-4-38