Canon PS-7000, Руководство по обслуживанию

Страница: 56 / 67

Chapter 5 Operation Principles
5-5
3. Miscellaneous
3.1. Printing mode setting on the BJ-W7000 printer
The color conversion tables (CRD) installed in the PS-7000 will give the best result on printout when
the printing mode on the printer itself is set to Standard. With the printing mode on the printer set to
Enhanced or Draft, printout can be different from what is expected, depending on image to be printed.
In that case, reset the printing mode to Standard and re-print the image. (For details how to set the
printing mode, please refer to the “Canon Hardware RIP PS-7000 Operator’s Manual.”)
3.2. Specifications for banner printing
Specifications for banner printing depend on application software and OS to be used. The maximum
length in which the print quality is guaranteed is different from the maximum printable length.
Below in the table is the maximum length printable with the PS-7000 and BJ-W7000.
Environment Maximum Length
Print quality guarantee 1,250 mm
With Adobe PS driver 8.5.1 (for Macintosh) 6,930 mm
With Adobe PS driver 4.2.4 (for Windows95/98) 3,270 mm
With Adobe PS driver 5.1(for Windows NT4.0) 9,999 mm
3.3. OCF / CID fonts
With the PS-7000, mixed use of the OCF fonts and CID fonts is supported, and thus rich resources of
OCF fonts can be utilized. The CID format has precedence over the OCF format for the same font.
The Roman fonts installed in the PS-7000 ROM are the OCF fonts, and there is no CID Roman font at
present.
OCF: Original Composite Format, a conventional PS font technology.
CID: Character Identifier-Keyed Font Format, a new PS font technology proposed by Adobe.