33
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
2) Shoot.
●
Press the shutter button all the way down.
●
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
●
Keep the camera still until the shutter
sound ends.
●
After displaying your shot, the camera will
revert to the shooting screen.
Recording Movies
1) Start recording.
●
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
●
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
●
Frames displayed around any detected
faces indicate that they are in focus.
●
Once recording begins, take your finger
off the movie button.
2) Resize the subject and recompose
the shot as needed.
●
To resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
●
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
(1)
3
Compose the shot.
●
To zoom in and enlarge the subject, move
the zoom lever toward [
] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom bar (1)
showing the zoom position is displayed,
along with the range of focus (2).)
●
To zoom in or out quickly, move the zoom
lever all the way toward [
] (telephoto)
or [ ] (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
4
Shoot.
Shooting Still Images
1) Focus.
●
Press the shutter button halfway. The
camera beeps twice after focusing, and
frames are displayed to indicate image
areas in focus.
●
Several frames are displayed when
multiple areas are in focus.
●
If [Raise the flash] is displayed, move
the [
] switch to raise the flash. It will fire
when shooting. If you prefer not to use
the flash, push it down with your finger,
into the camera.
(1)
(2)
