56
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
●
[Servo AF] (
56) is set to [Enable] and cannot be changed.
●
Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
●
[ ] and [
] are not available.
●
The camera can detect subjects even if you press the shutter
button halfway without pressing the [ ] button. After your shot,
[ ] is displayed in the center of the screen.
Shooting with Servo AF
Still Images
Movies
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1
Configure the setting.
●
Press the [
] button, choose [Servo
AF] on the [ ] tab, and then choose
2
Focus.
●
The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
●
Focusing may not be possible in some shooting conditions.
●
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
●
If optimum exposure cannot be obtained, the shutter speed and
aperture value are displayed in orange. Release the shutter
button, and then press it halfway again.
●
Not available when using the self-timer (
Choosing Subjects to Focus On (Tracking AF)
Still Images
Movies
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
●
Follow the steps in “Changing the AF
[Tracking AF].
●
[ ] is displayed in the center of the
screen.
2
Choose a subject to focus on.
●
Aim the camera so that [ ] is on the
desired subject, and then press the [ ]
button.
●
When the subject is detected, the camera
beeps and [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
●
If no subject is detected, [ ] is displayed.
●
To cancel tracking, press the [ ] button
again.
3
Shoot.
●
Press the shutter button halfway. [ ]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(
●
Press the shutter button all the way down
to shoot.
●
Even after your shot, [ ] is still displayed
and the camera continues to track the
subject.
