manualshive.com logo in svg

Canon PowerShot S500 Digital ELPH, Руководство по обслуживанию

Поделиться
Скачать
Canon PowerShot S500 Digital ELPH Скачать руководство пользователя страница 31

2.4 Troubleshooting Error Indications

1) Error indication when a user-resolvable error occurs

The indicator lights in green, then blinks in orange. This repeats.
Check the number of blinks and proceed to correct the error.

2) Error indication when an error not resolvable by the user occurs

The indicator toggles between orange and green (orange/green toggle blinking). This
repeats.
Check the number of toggled blinks and proceed to correct the error.

*1: The error code is displayed by the computer. With the iMac and Power Macintosh

G3, a "D" or "M" is appended to the beginning of the error code.

*2: The waste-ink warning can be canceled by pressing the 

RESUME button

.

*3: Press the 

RESUME button

to resume operation.

Table 2-1 ERROR INDICATIONS

Indicator

Error Status

Probable Cause and Faulty Parts

Blink Count

Code*

1

User-Recoverable Errors

<Cause>
1. No paper was loaded.
2. During feeding, the paper did not reach the

paper-end sensor.

3. During feeding, the paper's bottom edge 

missed the paper-end sensor.

4. The ASF sensor did not return to its initial 

position and the paper-end sensor concluded
that there was no paper. (ASF motor may be
out of sync.)

<Suspect Part> 
Paper feed section, sheet feeder unit, paper-end
sensor, control board
<Cause>
1. The paper-end sensor still detects the presence

of paper even after 23 inches of paper ejection
operation.

2. The ASF sensor did not return to its initial

position and the paper-end sensor concluded
that there was no paper. (Out of sync.)

3. During paper feeding abnormal timing caused

the paper-end sensor to still detect paper.

<Suspect Part> 
Paper feed section, paper-end sensor, control
board
<Cause>
The respective ink tank has run out of ink (in the
tank and sponge).
<Suspect Part> 
Ink tank

Orange
2 blinks

Orange
3 blinks

Orange
4 blinks

---

Paper feed error

---

Paper jam error

---

No-ink error*

3

Part 2: Troubleshooting

S600

2-10

Содержание PowerShot S500 Digital ELPH
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды