4. Service Mode
Function
Procedure
Remarks
Cleaning the BJ cartridge
Press and hold the RESET botton for 2 seconds or moreCleaning time
(while the AC cord is plugged in)
:Approx.20seconds.)
Test print
Print nozzle check pattern
1)
Nozzle pattern
Double click the RESET button.
BC-20/21e
(while the AC cord is plugged in)
2)
Service test print
Control ROM Version
See *1 service test print'
Needs BC-20
Page throughput
Print sample : See *3
Waste ink Amount
Destination setting
EEPROM Reset
See *2 EEPROM reset / Destination setting
(Reset waste ink amount)
Destination setting
See *2 EEPROM reset / Destination setting
(Japan/SP/Other)
*1
Service test print
-1 Without the cartridge installed, connect the AC power
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release.
-3 Open the front cover, install the BC-20 (black BJ cartridge) and set A4-sized paper.
-4 Double click the RESET button.
-5 Close the front cover.
-6 The printer starts service test printing.
*2
EEPROM reset / Destination setting
-1 Without the cartridge installed, connect the AC power
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release.
-3 Hold down the RESET button for 2 seconds or more and release.
-4 < EEPROM Reset >
< Destination setting >
Hold down the RESET button for 2 secs or more and release. -Japan
Press the RESET button once.
-SP
Press the RESET button 3 times
-Others
Press the RESET button twice
After the button is pressed, the carriage will move same
number of times as the RESET button is pressed.
*3
Print sample of 'Service test print'
You can check the EEPROM settings by conducting a 'Service test print'.
Control ROM Version
Amount of waste ink
Page throughputs of BK: BC-20
CL: BC-21e
Paper type
Destination setting
Other
Japan
BJ S100
Self print
SP
S100SP
Glossy paper
Other
S100
High resolution paper
Postcard
Plain paper
Ver X.XX BC-20 Lost XX.X% Page count ->BK XXXX CL XXXX LD XXXX PaperCnt ->Nol XXXX Cad XXXX Res XXXX Gls XXXX Sel XXXX Otr XXXX
BJYYYYY PurgeCnt -> Time yyyy Dot yyyy Mnu yyyy Crg yyyy Wip yyyy Dry : OFF Purge Flag : yyyy Door : close USBSerialNo. Yyyy Fch : yy
