manualshive.com logo in svg

Canon PowerShot A400, Быстрый старт

Поделиться
Скачать
Canon PowerShot A400 Скачать руководство пользователя страница 393

30

Correction :

Turn the printer on.

Correction :

Check to make sure the USB cable is connected correctly.

Correction :

Turn the printer off and back on again. Start the print job over.

Correction :

Remove paper from the paper cassette, and then make sure to load 
the correct amount of paper in the paper cassette.

For messages caused by errors related to the operating environment of your 
computer, follow the messages on the screen.

Error occurred during communication.
Check the printer power and printer connections.

Cause :

Power to the printer goes off while printing is in progress.

Cause :

The cable came loose or was disconnected while printing was in 
progress.

If the USB cable is not properly connected, communication problems may 
occur. Make sure that the printer is connected to your computer’s root hub 
port with suitable USB cable, and then try printing again.

Problem with the printer.
Turn printer off and back on.

Cause :

The printer unit was not initialized successfully.

Cause :

There is too much paper in the paper cassette.

CDP-E

039

© 2004 CANON INC.

Содержание PowerShot A400













































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды