86
1
2
3
4
5
6
7
8
9
Cover
Preliminary Notes and
Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Smart Auto
Mode
Other Shooting
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
4
Use the smartphone to connect
to the network displayed on the
camera screen.
z
z
Choose the displayed SSID (network
name) from the smartphone’s Wi-Fi
setting menu.
z
z
Enter the encryption key displayed on the
camera screen into the password field on
the smartphone.
5
Start CameraWindow on the
smartphone.
X
X
Once the smartphone is recognized on
the camera, the device connection screen
will be displayed on the camera.
6
Choose a smartphone to
connect to.
z
z
Press the <
o
><
p
> buttons to choose
the smartphone for the connection
(
), and then press the <
m
>
button.
7
Adjust the privacy settings.
z
z
Press the <
q
><
r
> buttons to choose
[Yes], and then press the <
m
> button.
X
X
You can now use the smartphone to
receive images sent from the camera,
or to geotag images on the camera
(
).
X
X
When the smartphone has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
•
When you are in the vicinity of an access point that you have
previously connected to, the camera will automatically connect to
it in step 3. To change access points, select [Switch Network] from
the screen that will be displayed when the connection is being
established, and follow steps 4 – 5 in “Adding a Computer” (
).
•
All camera images can be viewed from the connected smartphone
when you choose [Yes] in step 7. To keep camera images private, so
that they cannot be viewed from the smartphone, choose [No] in step 7.
•
You can connect to smartphones that you have already connected to by
choosing them on the [Select a Device] screen in step 3.
•
After you have accessed the Wi-Fi menu once, you can access it again by
pressing the <
o
> button. The recent target device is listed first, so you can
easily connect again by pressing the <
o
><
p
> buttons to choose it. To add
a new device, display the device selection screen by pressing the <
q
><
r
>
buttons, and then configure the setting. If you prefer not to display recent
target devices, press the <
n
> button, and on the [
3
] tab, choose [Wi-Fi
Settings] ► [Target History] ► [Off].
•
The image quality level for movies that can be sent may differ depending
on the smartphone. Refer to the instruction manual provided with your
smartphone for details.
•
To add multiple smartphones, repeat the above procedures starting from
step 1.
•
To change privacy settings for smartphones added to the list, choose the
smartphone whose settings you want to change from [Edit a Device] in step 3,
and then choose [View Settings].
COP
Y