Canon PowerShop SX270 HS, Руководство пользователя

Страница: 92 / 198

1
2
3
4
5
6
7
8
9
10
11
Cover
Preliminary Notes
and Legal Information
Contents: Basic
Operations
Advanced Guide
Camera Basics
Using GPS
Function
Auto Mode/
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, and M
Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
92
3
Shoot.
z z Press the shutter button halfway. [ ]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
( = 92 ).
z z Press the shutter button all the way down
to shoot.
X X Even after your shot, [ ] is still displayed
and the camera continues to track the
subject.
• [Servo AF] ( = 92 ) is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
• [AF-Point Zoom] on the [ 4 ] tab is not available.
• [
e
] is not available.
•
When shooting in [
f
] mode (
=
89 ), press and hold the <
q
> button for at
least one second.
• If [Face ID] is set to [On], names will not display when registered people
are detected, but the names will be recorded in the still images ( = 57 ).
However, a name will display if the subject chosen to focus on is the same as
a person detected with Face ID.
Still Images
Shooting with Servo AF
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1
Configure the setting.
z z Press the < n > button, choose
[Servo AF] on the [ 4 ] tab, and then
choose [On] (
=
35 ).
2
Focus.
z z The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
• Focusing may not be possible in some shooting conditions.
• In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway. In this
case, the focus and exposure are set according to the specified AF
frame mode.
• If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter button,
and then press it halfway again.
• AF lock shooting is not available.
• [AF-Point Zoom] on the [
4
] tab is not available.
• Not available when using the self-timer ( = 54 ).
COP
Y