Canon PIXMA PRO-10, Руководство пользователя

Страница: 570 / 811

5.
Adjust the amount of extension from the paper
If necessary, adjust the amount of extension using the Amount of Extension slider.
Moving the slider to the right increases the amount extending off the paper, and moving the slider to
the left decreases the amount.
It is recommended to set the slider at the second position from the right for most cases.
Important
When the Amount of Extension slider is set to the rightmost position, the back side of the paper
may become smudged.
6.
Complete the setup
Click Print .
When you execute print, the data is printed without any margins on the paper.
Important
Borderless printing only supports specific paper sizes. Make sure to select a paper size with the
wording "(borderless)" from the
Paper Size .
If borderless printing is enabled, only the following selections are available from the Print dialog when
you display the pop-up menu and click
Quality & Media and then Media Type : Photo Paper Plus
Glossy II , Photo Paper Pro Platinum , Photo Paper Pro Luster , Photo Paper Plus Semi-gloss ,
Matte Photo Paper , and Other Glossy Paper .
Print quality may deteriorate or the sheet may be stained at the top and bottom depending on the type
of paper used.
When the ratio of the height to the width differs from the image data, a portion of the image may not
be printed depending on the size of the media used.
In this case, crop the image data with an application software according to the paper size.
When scaled printing or page layout printing is enabled, you cannot perform borderless printing.
Expanding the Range of the Document to Print
Setting a large amount of extension allows you to perform borderless printing with no problems. However,
the portion of the document extending off the paper range will not be printed and for this reason, the
subjects around the perimeter of a photo may not be printed.
Try borderless printing once. When you are not satisfied with the result of borderless printing, reduce the
amount of extension. The extension amount decreases as the
Amount of Extension slider is moved to the
left.
Important
When the amount of extension is decreased, an unexpected margin may be produced on the print,