A
3
2
A
B
Check
Set Printer IP Address
Screen is Displayed
Turn off the network device (router, etc.), turn it back on, then click
Connect
(A).
Check 2
Make sure that you follow "Connection Checklist" on page 7, then click
Connect
(A).
Check 1
Activate the DHCP function of the network device, then click
Connect
(A).
Make sure that the DHCP function of the network device (router, etc.) is active.
Check 3
To specify the IP address, refer to and onward in "Specifying the Printer's IP Address" on
page 5.
For details on how to check settings of the network device, refer to the manual supplied with the
network device or contact its manufacturer.
•
•
For details on how to change settings of the network device, refer to the manual supplied with the
network device or contact its manufacturer.
•
Check 4
In Windows, make sure that
Get IP address automatically
is selected, then click
Connect
(A).
In Macintosh, make sure that
Get IP address automatically
is selected for
TCP/IP
Setting
(B) in the
Set Printer IP Address
screen, then click
Connect
(A).
For details on how to specify the IP address, refer to and onward in "Specifying the Printer's IP
Address" on page 5.
•
If the problem is not solved, specify the IP address.
Check 5
DHCP function
•
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
IP address
•
A numerical identification assigned to each computer or network device connected to a network.
DHCP function
•
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
IP address
•
A numerical identification assigned to each computer or network device connected to a network.
When the
Disconnect Cable
screen appears, remove the USB cable, then click
Next
.
The wired connection setup of the printer is now complete. Click
Complete
or
OK
.
Proceed with the setup by following the procedures from "Information" (Windows) or "Registration
(Macintosh)" (Macintosh) in the printed manual:
Getting Started
.
•
Glossary
Glossary
When the
Connect Cable
screen appears, connect the printer to the computer with
a USB cable.
For Macintosh, click
Next
.
When the
Set Printer IP Address
screen appears, check the IP address settings by referring
to Check 4 and onward in "Set Printer IP Address Screen is Displayed" on page 4.
•
