
Cleaning the Print Head
Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern.
Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the
print head only when necessary.
1.
Make sure that the power is turned on.
2.
Clean the print head.
(1)
Press the
Setup
button.
The
Setup menu
screen will appear.
(2)
Use the or button to select
Maintenance
, then press the
OK
button.
(3)
Use the or button to select
Cleaning
, then press the
OK
button.
The machine starts cleaning the print head.
Do not perform any other operations until the machine completes the cleaning of the print head. This takes about
1 to 2 minutes.
3.
Check the print head condition.
To check the print head condition, print the nozzle check pattern.
Printing the Nozzle Check Pattern
Note
To access other available functions, use the mode buttons.
If the problem is not resolved after cleaning the print head twice, clean the print head deeply.
Cleaning the Print Head Deeply
75
Содержание PIXMA MX394
