manualshive.com logo in svg

Canon PIXMA MX394, Онлайн-руководство, Страница: 76 / 127

Поделиться
Скачать
Canon PIXMA MX394 Скачать руководство пользователя страница 76

Cleaning the Print Head Deeply

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print
head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when
necessary.

1.

Make sure that the power is turned on.

2.

Clean the print head deeply.

(1)

 Press the 

Setup

 button.

The 

Setup menu

 screen will appear.

(2)

 Use the   or   button to select 

Maintenance

, then press the 

OK

 button.

LCD and Operation Panel

(3)

 Use the   or   button to select 

Deep cleaning

, then press the 

OK

 button.

The machine starts cleaning the print head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the print head. This takes
about 1 to 2 minutes.

3.

Check the print head condition.

To check the print head condition, print the nozzle check pattern.

Printing the Nozzle Check Pattern

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours. Do not disconnect
the power plug when turning off the power.

If the problem is still not resolved, replace the FINE cartridge with a new one.

Replacing a FINE Cartridge

If the problem is still not resolved after replacing the FINE cartridge, contact the service center.

 Note

 To access other available functions, use the mode buttons.

76

Содержание PIXMA MX394
































































































































Отзывы:

Нет отзывов