11
Confirm Connection Status
Adding Your Multifunction to Your Network
Step Three
Select
Confirm LAN settings
, then press the
OK
button.
Step Four
Select
WLAN setting list,
then press the
OK
button.
Make sure that Connection is set to
Active,
and then press the
Copy
button to return to standby.
It may take a while before the connection is complete. In this
case, press the Back* button and wait for about a minute, then
display the Wireless LAN setting list screen again.
*Back button location varies depending on model.
NOTE
: If the communication status does not improve, make
sure of the following.
•The machine and network device are turned on.
•There is no obstacle between the machine and access point,
and wireless communication is possible.
•There is no microwave, refrigerator or any other object that
may cause radio interference nearby.
.
<< Previous
Next >>