Windows
Macintosh
XXXXXXXX
PRINTED IN THAILAND
Windows
®
Software Installation
Note
The screens below refer to Windows Vista™ operating system Ultimate Edition
(hereafter referred to as “Windows Vista”) installation.
Screens may vary depending on the operating system you are using.
Log into a user account with the administrator privilege.
Before installing the software, disable all anti-virus programs and automatically
loading programs.
A message asking for your confirmation to restart your computer may appear
during the installation process. If this message is displayed, follow the on-screen
instructions and click
OK
.
The installation resumes from where it left off when your computer has been
restarted.
If the computer is restarted during installation, do not remove the
Setup CD-ROM
during restarting.
a
Be sure to
TURN THE MACHINE OFF
before continuing.
(1) Press the
ON/OFF
button.
(2) Make sure that the
Power
lamp stops flashing.
b
Turn the computer on and start Windows.
Important
If the Found New Hardware or Found New Hardware Wizard screen appears
automatically, remove the USB cable connected to your computer. Click Cancel
to quit the screen. In Windows Vista, the screen may close automatically when
the USB cable is unplugged. Then turn off the machine and proceed from step
c
to install the software.
c
Insert the
Setup CD-ROM
. The setup program should run
automatically.
In Windows Vista, go to Step
d
. In Windows XP and Windows 2000, go to
Step
f
.
d
If the
AutoPlay
screen appears, click
Run Msetup4.exe
.
e
If the
User Account Control
screen appears, click
Continue
.
If the same screen reappears in subsequent steps, click
Continue
.
f
When the main menu appears, click
Easy Install
.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click
Custom Install
and follow the on-
screen instructions to proceed with the installation.
•
•
•
•
•
g
When the list of applications to install appears, confirm the
contents and click
Install
.
Note
Move the cursor over items to display explanations of each application.
h
Read the License Agreement carefully and click
Yes
. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
i
When the
Setup Method
screen appears, select
Use the
printer via USB
, then click
Next
.
j
When the
Printer Connection
screen appears, connect
one end of the USB cable to the computer, the other to the
machine, then
TURN THE MACHINE ON
. The software will
begin identifying the printer port being used.
Important
If you cannot go to the next procedure after three minutes, refer to “Cannot
Install the MP Drivers” in the
Quick Start Guide
.
To Computer
→
USB
When using Windows 2000:
When you connect the machine to the computer with a USB cable, a
message asking for your confirmation to restart your computer is displayed.
Click
Yes
. Then when an error message is displayed, click
OK
to proceed
with the installation.
k
When the
Setup Complete
screen appears, click
Next
.
l
When the
User Registration
screen appears, click
Next
.
Note
To register later, click
Cancel
and go to Step
m
. After software installation is complete,
double-click
on the desktop.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
f
on the front page.
m
When the
PIXMA Extended Survey Program
screen
appears, confirm the message. We would appreciate it if you
would take part in this program regarding the use of Canon
printers. If you can agree, click
Agree
.
n
When the
Installation completed successfully
screen
appears, click
Exit
.
After clicking
Exit
, remove the CD-ROM.
If
Restart
is displayed, make sure that the
Restart the system now
(recommended)
check box is selected, then click
Restart
.
Remove the CD-ROM after clicking
Restart
and restarting the computer.
Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
Software installation is now complete.
Macintosh
®
Software Installation
Note
Since Mac
®
OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier
are not supported, do not connect the machine to these.
The screens below refer to Mac OS X v.10.4.x installation. Screens may vary
depending on the operating system you are using.
Log on as an Administrator.
Before installing the software, disable all anti-virus programs and automatically
loading programs.
a
Connect one end of the USB cable to the computer and the
other to the machine.
Note
Make sure the machine is turned on.
USB
b
Turn on your Mac and insert the
Setup CD-ROM
.
Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
c
Double-click the
Setup
icon.
d
When the
Authenticate
screen appears, enter your
administrator name and password. Click
OK
.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
e
When the main menu appears, click
Easy Install
.
The MP Drivers, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click
Custom Install
and follow the on-
screen instructions to proceed with the installation.
f
When the list of applications to install appears, confirm the
contents, then click
Install
.
Note
Move the cursor over items to display explanations of each application.
g
Read the License Agreement carefully and click
Yes
. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
•
•
•
•
h
When the
Setup Complete
screen appears, click
Next
.
i
When the
User Registration
screen appears, click
Next
.
Note
To register later, click
Cancel
and go to Step
j
. After software installation is complete,
double-click
on the desktop.
Follow the on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the machine. See
Step 1-
f
on the front page.
j
When the
Installation completed successfully
screen
appears, click
Restart
.
Remove the CD-ROM after clicking
Restart
and restarting the computer.
Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
When the computer restarts, the Canon IJ Network Tool will start up
automatically.
When using Mac OS X v.10.2.8 to v.10.3.3:
Restarting the computer while connected to the machine may cause the
machine not to be detected. To resolve this, either unplug the USB cable
then plug it back in again, or turn the machine off then back on again.
Note
When using Mac OS X v.10.2.8 to v.10.3.x, before using the Operation Panel on
the machine to save scanned originals to the computer, it is necessary to select
MP
Navigator EX
as the launch application on
Image Capture
under
Applications
. For
details, refer to “Scanning Images” in the
User’s Guide
on-screen manual.
k
When the
Canon IJ Network Tool
screen appears, select
USB connection
, then click
OK
.
Software installation is now complete.
Part no.
QT5-1178-V01
© 2007 Canon Inc. “Microsoft” is a registered trademark of Microsoft Corporation. “Windows” is a trademark of Microsoft Corporation, registered in the U.S. and other countries. “Windows Vista” is a trademark of Microsoft Corporation. “Macintosh” and “Mac” are trademarks of Apple Inc., registered in the U.S. and other countries.
USB connection is explained here. For wired LAN connection, refer to the
Network Setup Guide
.
