Canon PIXMA iP7200 Series, Руководство пользователя

Страница: 446 / 637

the security software to always allow access.
If using any programs that switch the network environment, check their settings. Some
programs will enable a firewall by default.
Check 11: When using a router, connect the printer and computer to the LAN side
(same network segment).
Check 12: When the printer is connected to an AirPort Base Station via a LAN, use
alphanumeric characters for the name of the network (SSID).
If the problem is not resolved, insert the CD-ROM in the DVD/CD-ROM drive on your computer to
start setting up again, or access our web site through the Internet and download the latest
MiniMasterSetup for your model.
For placement:
Make sure that there is no barrier or obstacle between the access point and the printer.
Cannot Print from a Computer Connected to the Network
Check 1: Make sure that the network settings of the computer are correct.
For the procedures to set up the computer, refer to the instruction manual of your computer or
contact its manufacturer.
Check 2: If the printer driver is not installed, install the printer driver.
Install the printer driver with the Setup CD-ROM.
Check 3: Make sure that access control is not set to the access point.
For the procedures to connect an access point and set it up, refer to the instruction manual of
your access point or contact its manufacturer.
Note
To check the MAC address or the IP address of the computer, see Checking the IP
Address or the MAC Address of the Computer .
Page top