Canon Perfect Binder-C1, Руководство по замене

Страница: 27 / 54

Chapter 2
2-9
11) Turn on SW2-2, SW2-3, and SW2-7 [1] on the service PCB and press
the push switch PSW1 [2].
F-2-34
12) Check that the trimming blade [1], pressing plate [2], and stack rotation
assembly [3] operate and that the trimming blade moves to the safe posi-
tion.
13) Remove the fixing bracket [1].
- 2 screws [2]
F-2-35
14) Remove the four screws [1] securing the trimming assembly, and then
draw out the trimming assembly [2].
F-2-36
2.1.13 Replacement parts in stacking tray assembly
0024-6650
T-2-1
2.1.14 Before replacing the SB flapper gear (15 million
sheets)
0024-6653
1) Remove the top cover.
2) Remove the front upper cover.
(page 2-3)
Reference[Removing the
Front Upper Cover]
3) Remove the rear upper cover.
(page 2-4)
Reference[Removing the Rear
Upper Cover]
2.1.15 SB flapper gear (15 million sheets)
0024-6657
1) Remove the frame upper cover [1].
- 4 screws [2]
F-2-37
2) Remove the top cover switch [1].
- 2 screws [2]
F-2-38
CAUTION:
Pressing the push switch PSW1 operates the trimming blade, pressing plate,
and stack rotation assembly. Be careful not to have your hand and clothes
caught in them.
No. Parts Name Q'ty
[1] SB flapper Gear 1
[2] SB flapper unit 1
LED1
PSW1
1
PSW2 PSW3
LED2 LED3
1 2 3 4 5 6 7 8
2 3
SW1
SW2
4
[2]
[1]
[1] [2]
[1]
[1]
[2]
[3] Alignment rack (front) 1
[4] Alignment rack (rear) 1
[5] Alignment motor 2
No. Parts Name Q'ty
[2]
[1]
[1]
[2]